A UbuntuCore and a UbuntuMATE image files are available from FriendlyElec.
Allwinner A64 Board Serial Debug PortIt has MIPI-DSI and DVP interfaces, GPIO pin-header compatible with Raspberry Pi and a serial debug port.
The input range is 4.7V 5.6V. It can take power input from the MicroUSB or the VDD5V pin from the Debug Port. The following cards are what we used in all our test cases presented here. Attention: the dd command under Linux doesnt work for flashing Android image. On the utilitys main window select your TF cards drive, the wanted image file and click on write to start flashing the TF card. If the green LED is on and the blue LED is blinking this indicates your NanoPi A64 has successfully booted. If you can see the blue LED flashing it means your board is working and UbuntuCore is being loaded. If it is not connected via Ethernet or its DHCP is not activated obtaining an IP will fail and system will hang on for about 15 to 60 seconds. You need to save your changes and reboot your system to make your changes take effect. Save, exit, reboot your system and run the following commands to turn on the WiFi. Allwinner A64 Board Zip Utility ToUse the 7-zip utility to extract it and a lichee directory and an Android directory will be generated. Allwinner A64 Board Code To TheCopy its source code to the nanopi-a64-bspbrandytoolchain directory. Note: you will not get a workable U-boot if you dont do this.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |